Search results for "Sailing yacht"

Numerical methods in the design process of a sailing yacht

2014

Parametric Hull Design with Rational Bézier Curves and Estimation of Performances

2021

In this paper, a tool able to support the sailing yacht designer during the early stage of the design process has been developed. Cubic Rational Bézier curves have been selected to describe the main curves defining the hull of a sailing yacht. The adopted approach is based upon the definition of a set of parameters, say the length of waterline, the beam of the waterline, canoe body draft and some dimensionless coefficients according to the traditional way of the yacht designer. Some geometrical constraints imposed on the curves (e.g., continuity, endpoint angles, curvature) have been conceived aimed to avoid unreasonable shapes. These curves can be imported into any commercial Computer Aide…

A Numerical Approach to the Keel Design of a Sailing Yacht

2008

This paper describes an approach to the keel design of a sailing yacht. The related software, which is fully automatic, permits to obtain an optimal shape by modifying the surface used to define the keel planform. B-spline curves and surfaces have been used because of their ability in following complex shapes. The algorithm integrates ad hoc implemented original software with Computational Fluid Dynamics (CFD) commercial ones. The optimisation procedure makes use of Genetic Algorithms (GAs) and a gradient – based optimiser for the refinement of the solution. A careful CAD and CFD modelling leads to a stable and efficient generalised method, which has been applied to the design of the centre…

Using FEM simulation to predict structural performances of a sailing dinghy

2017

The use of finite element method (FEM) tools is proposed to investigate the structural response of an eco-sustainable sailing yacht to different loading conditions, typical of those acting during regattas. The boat is, in particular, a 4.60 m dinghy with the hull and the deck made of an hybrid flax–cork sandwich and internal reinforcements made of marine plywood. A preliminary activity has consisted in the refitting of an existing model in order to reduce the hull weight and to improve performances during manoeuvrings. These tasks have been interactively simulated in the virtual environment of the boat CAD model, where longitudinal and transversal reinforcements were enlightened and the m…

Yacht performance monitoring in real sailing conditions

2019

Abstract In this paper a multi-method approach is used to setup and validate a monitoring system applied to a small sailing boat during real sailing conditions. This monitoring system is able to transform the data coming from some typical devices installed on board into information about the deformed state of the boat. GPS, Wind Data Logger and cameras have been installed on the boat to measure its route and speed, the apparent wind velocity and direction and the positions of the crew members. These data are processed to determine the equilibrium of the boat and estimate the loads applied on it. Then, a CAD/FEM model calculates the effects of these loads on the boat shape. The resulting def…

Refitting of an eco-friendly sailing yacht: numerical prediction and experimental validation

2016

A 4.60 m sailing yacht, made with a flax fiber composite and wood, has been refitted with the aim of hull weight reduction and performance improvement during regattas. The first objective was obtained with a lightening of internal hull reinforcements while the second one with a reduction of the maximum beam, in order to minimize the longitudinal moment of inertia. The refitting was first simulated via CAD-FEM interaction to establish the feasibility of the procedure and to verify the structural integrity. The resulting hull was then instrumented with strain gauges and tested under typical rigging and sailing conditions. Results obtained by the numerical modeling and measured from experiment…

New algorithms to evaluate the real shape of a hull

2018

In this study, a new method to compare rebuilt surfaces of hulls of sailing yachts is presented. In particular, the considered rebuilt surfaces are created through classic reverse engineering approaches. The new method has been developed by means of Grasshopper, a free generative algorithms editor that can be used as plugin of Rhinoceros, one of the most widespread free-form modelling software. In particular, two different algorithms have been developed: the first one allows controlling the quality of the rebuilt surfaces, the second one, instead, allows to measure the deviations between the original CAD Model and the rebuilt surface of the hull. A case study related to the hull of a small …

A multi-technique simultaneous approach for the design of a sailing yacht

2015

In this paper, most significant steps involved during the whole process of designing a sailing yacht are outlined. In particular, a novel simultaneous approach has been proposed to optimize the design process of a sailing yacht. Analytical resistance prediction models are simultaneously used with CAD systems and computational fluid dynamics tools to find, in the more effective way, the best solution for the chosen design conditions. As a general rule, in fact, once the target point has been decided, task of the designer is the definition of those systems of aerodynamic and hydrodynamic forces that are in equilibrium when the boat sails at its target. Unfortunately, a multi-purpose yacht doe…

A reverse engineering approach to measure the deformations of a sailing yacht

2016

In this work, a multidisciplinary experience, aimed to study the permanent deformations of the hull of a regatta sailing yacht is described. In particular, a procedure to compare two different surfaces of the hull of a small sailing yacht, designed and manufactured at the University of Palermo, has been developed. The first one represents the original CAD model while the second one has been obtained by means of a reverse engineering approach. The reverse engineering process was performed through an automatic close-range photogrammetry survey, that has allowed to obtain very accurate measures of the hull, and a 3D modelling step by the well-known 3D computer graphics software Rhinoceros. The…